Blossom Strike Tanto Spring Assisted Knife - ABS Black
6 sold in last 24 hours
This isn’t your average spring assist; it’s a Blossom Strike Tanto built to earn pocket time. A tuned flipper-driven assist snaps the black American tanto blade into lockup, while the 3D-printed geisha and cherry blossoms in ABS Black turn it into instant counter bait. At 5" closed, with a liner lock, jimping, and deep-carry clip, it’s a display magnet that actually cuts. For the buyer who cares how a knife opens as much as how it looks, this one delivers both.
Blossom Strike Tanto: Where spring-assisted action meets Japanese-inspired art
The Blossom Strike Tanto Spring Assisted Knife - ABS Black doesn’t pretend to be subtle. It’s a spring assisted knife that leads with geisha-and-cherry-blossom artwork, then backs it up with a black American tanto blade that actually works in the real world. If you’re the kind of buyer who cares how a knife deploys, how the lock feels at full extension, and why a certain blade geometry punches above its price, this one speaks your language.
Spring assisted knife action that earns the flip
Mechanically, this is a spring assisted knife done the right way: you start the motion on the flipper tab, the assist takes over, and the blade snaps into a clear, audible lockup. That matters. The assist is tuned so you don’t need a heroic push — just a confident press — and the detent holds well enough that it won’t ghost-open in pocket. Jimping near the spine gives your thumb a reference point once the blade is out, and the liner lock engages cleanly behind the tang, giving you tactile confirmation that it’s ready to work.
Why the flipper tab beats thumb studs on this build
On a knife with this visual story, the flipper tab is the right choice. Thumb studs would clutter the blade and fight the cherry blossom motif. The flipper keeps the silhouette clean, protects the artwork, and gives you one-handed opening that stays consistent whether you’re bare-handed or wearing work gloves. It’s also intuitive for first-time spring assisted knife users — pull, feel the assist catch, and you’re open.
Action, lock, and repeatability
What separates a decent spring assisted knife from a drawer queen is repeatability. Here, the pivot, spring, and liner lock geometry are dialed to do the same thing every time: predictable break from closed, authoritative snap to open, liner lock landing in the same spot on the tang. That’s the kind of consistency EDC users and retailers both notice on the second and third flip.
American tanto blade design: form, function, and matte black finish
The blade is an American tanto — straight primary edge with a secondary angle at the tip — giving you two working zones. The long edge handles cardboard, tape, and cordage, while the reinforced tip is made for puncture and controlled scoring cuts. In daily use, that means more tip strength where a standard drop point might roll or chip under abuse.
Matte black coating with cherry blossom contrast
The matte black finish cuts glare and visually tightens the blade profile, which matters when you’re running an art-forward theme. The pink cherry blossoms printed along the blade don’t just decorate; they pull the eye from the geisha on the handle to the cutting edge itself. The result is a spring assisted knife that feels like a single composition, not a random blade slapped onto a printed handle.
Handle ergonomics and ABS construction: not just a pretty face
The ABS handle scales carry a 3D-printed geisha portrait and blossoms, but the ergonomics weren’t an afterthought. At 5 inches closed and 8.75 inches overall, it lands in the sweet spot for EDC — enough real estate for a full grip without becoming a pocket anchor. The contour and lightening holes toward the rear help trim weight to a manageable 4.21 ounces, so it carries with presence but not fatigue.
3D-printed artwork that outlasts a sticker
There’s a world of difference between slapped-on decals and the 3D-printed graphics here. The geisha and cherry blossoms are printed into the ABS, resulting in vivid detail that resists peeling and pocket wear. Collectors notice this immediately: it looks like a custom piece without the fragility of surface-only art.
Pocket clip, lanyard hole, and real EDC carry
The deep-carry style pocket clip tucks the blade low, which matters when you’re carrying a visually loud knife in a conservative environment. The lanyard hole at the butt gives you another way to secure or personalize it — paracord fobs, bead work, or just a bright pull for fast retrieval from a pack.
Spring assisted knife vs automatic vs OTF: mechanism clarity for serious buyers
This is a spring assisted knife, not an automatic knife and not an OTF. That distinction is more than semantics:
- Spring assisted knife: You initiate opening manually with the flipper; once the blade passes a certain point, a spring completes the deployment. There is no button-triggered firing from fully closed.
- Automatic knife: A button or switch releases the blade from fully closed, and the spring fires it open in one motion. No manual pre-load on the blade itself.
- OTF (out-the-front): A subset of automatic knives where the blade travels linearly out the front of the handle via a sliding or double-action mechanism.
Collectors and informed buyers care about that mechanism line. This Blossom Strike Tanto sits firmly in the assisted-opening folder camp: flipper start, spring finish, side-opening, liner lock.
Legal context: how a spring assisted knife fits into the real-world rules
Under U.S. federal law, a spring assisted knife like this is generally treated differently from a true automatic knife, because you must manually start the blade before the assist engages. That said, knife law is overwhelmingly state and local. Some jurisdictions group assisted openers with automatics; others distinguish them explicitly. Blade length limits, carry restrictions (especially in schools, government buildings, or certain cities), and definitions of "switchblade" can all vary.
The practical takeaway: this design is often more acceptable than a button-fired automatic knife or OTF in many regions, but you should always verify your current state and local regulations before carrying. Retailers stocking this piece should be ready to explain that it’s a spring assisted flipper, not a push-button switchblade, while still advising customers to check their local laws.
What Buyers Ask Before Purchasing an Automatic Knife
Are automatic knives legal?
In the U.S., federal law (the Federal Switchblade Act) restricts interstate commerce of automatic knives — blades that open by a button, switch, or similar device — but allows certain exemptions for military, law enforcement, and one-armed individuals. States then layer their own rules on top: some allow automatic knives and OTF knives with few limits, others restrict blade length, carry style, or outright possession. City ordinances can be even stricter.
This Blossom Strike is a spring assisted knife, not a true automatic knife, which often makes it easier to own and carry. Still, you should confirm laws where you live, work, or travel; legality can change at county and city lines.
What’s the difference between an automatic knife, OTF, and a switchblade?
"Switchblade" is the common legal and cultural term for an automatic knife — a knife that opens from fully closed with a button, switch, or slider, powered by an internal spring. An automatic knife can be side-opening or out-the-front. An OTF knife is specifically an automatic where the blade travels straight out the front of the handle, usually via a thumb slider and either single or double action. A spring assisted knife like this one is a manual folder with help: you move the flipper or thumb stud to start the blade; only then does a spring finish the open. That mechanical distinction is why many jurisdictions treat assisted openers differently from full automatics and OTFs.
What makes this spring assisted knife worth buying?
Three things: the action, the geometry, and the artwork. The assisted flipper action is tuned for reliable, one-handed opening without feeling sloppy or over-sprung. The American tanto blade gives you a genuinely useful two-zone edge with a reinforced tip, finished in matte black for low glare. And the 3D-printed geisha and cherry blossom theme on ABS Black turns it into a conversation piece that still works as a daily cutter. Collectors get display value; EDC users get a knife they won’t baby.
For the buyer who knows why mechanism matters
If your interest in knives starts with the sound of a clean lockup and the feel of a dialed-in spring, the Blossom Strike Tanto Spring Assisted Knife - ABS Black fits right into that world. It’s a spring assisted knife that respects the difference between assisted, automatic, and OTF, delivers a dependable flipper-driven deployment, and wraps it all in a geisha-and-blossoms motif that actually holds up in pocket. It’s built for the enthusiast who chooses gear with intent — and wants that choice to show every time the blade snaps open.
| Blade Length (inches) | 3.75 |
| Overall Length (inches) | 8.75 |
| Closed Length (inches) | 5 |
| Weight (oz.) | 4.21 |
| Blade Color | Black |
| Blade Finish | Matte |
| Blade Style | American Tanto |
| Blade Edge | Plain |
| Blade Material | Steel |
| Handle Finish | Matte |
| Handle Material | ABS |
| Theme | Geisha |
| Pocket Clip | Yes |
| Deployment Method | Flipper tab |
| Lock Type | Liner lock |